Issue or Problem:
Wifi Issues auto-connecting to the same SSID with the SnapStream 1ch encoder.
Solution:
- Download the Firmware here: Yuan Firmware FW20211105NSS Update
- Unzip it, and use the Browse button on the encoder's WebUI to point it to the extracted firmware image you downloaded.
- Click the update button and wait for the firmware to be uploaded, updated, and applied. The encoder will reboot itself during this process.
Additional Notes:
Blinking LED indication on the encoder when no connection in Wi-Fi client mode.
If the SnapStream Server is having problems receiving the Stream after this encoder has been rebooted, browse to the encoder's WebUI > go to the Streaming Tab, and stop the stream and start the stream again.
If you change the Video input on the Source tab (HDMI/SDI) without stopping the stream on the Streaming tab first, you may find that the Video input setting doesn't get retained when the encoder is rebooted.
Applies to Version:
SnapStream 1CH (2018) v1 encoders (Yuan encoder)